Rusty's not very quiet cuda progress

Howlin at the moon baby! [smilie=e: finished the cleanup & hit a couple a little touch up welds & now she's rustproof!
 

Attachments

  • 450crop_por15_quarter_area_0447.jpg
    450crop_por15_quarter_area_0447.jpg
    64.2 KB · Views: 192
Nothin to do on a rainy evening? well, wake up the child in you & play in the mud! [smilie=E: Rich.
 

Attachments

  • 450_mud__pass_q_0450.jpg
    450_mud__pass_q_0450.jpg
    26.9 KB · Views: 180
Pass side is i hope close enough for blockin, moved over to the drivers side again, mud on!
 

Attachments

  • 450drivers_quarter_putty_on_work_0482.jpg
    450drivers_quarter_putty_on_work_0482.jpg
    41.3 KB · Views: 156
after chockin on another 30lbs a dust, I hope that was the last coat, gettin dark, but I'm close!
Mud off!
 

Attachments

  • 450drivers_quarter_putty_off_work_0481.jpg
    450drivers_quarter_putty_off_work_0481.jpg
    29.1 KB · Views: 156
Only step that is better is the primer....course, then yah see all your boo-boos. :(

[smilie=e:
 
Yea, i know this baby is gonna take a ton a blockin, but she's come a long way, shell is on the homestretch now, fenders , hood , header & valences are bout done, doors still loom in their old paint yet, thinkin bout sendin those out for a dip or blast, real tired a strippin stuff! time will tell! Rich.
 
Pepsi is the dust cutter of choice here, a dash a rum on occasion, my drinkin days are long dead,along with many a brain cell! [smilie=e: Rich.
 
Looking good Rich, gonna have to read through every page rather than just skim them next week when I'm [smilie=b: on a night shift
 
Prime Time!
got everything tack coated(well that I could hit with the gun!)
 

Attachments

  • 450_tack_coat_0523.jpg
    450_tack_coat_0523.jpg
    40.4 KB · Views: 92
the bay be ready for hi build! fun sandin in there!
 

Attachments

  • 450_bay_is_close_shell_prime_0521.jpg
    450_bay_is_close_shell_prime_0521.jpg
    38.7 KB · Views: 92
Roof kinda ran away on me, well another round a sandin before the real sandin begins.
 

Attachments

  • 450_drippy_roof_shell_prime_0520.jpg
    450_drippy_roof_shell_prime_0520.jpg
    36.5 KB · Views: 91
bottom 3/4 done, ran the gun dry under the trunk area, enough (paintin) for one day cleaned up the mess & put the feed bag on, too nice out there to not go back out,so I finished the front brakes & hooked up all the lines on the 74.
 

Attachments

  • 450_bottom_shell_prime_0522.jpg
    450_bottom_shell_prime_0522.jpg
    34 KB · Views: 90
Sanded out the really rough spots & proceded to shoot the next coat, did the roof a bit better(only one or 2 drip lines) one quarter really nice & totally messed up the other, mann I shot a gallon of primer on her ,coulda used another quart, start on the hi build next time out, then the fun begins!
 
RUSTY Cuda said:
bottom 3/4 done, ran the gun dry under the trunk area, enough (paintin) for one day cleaned up the mess & put the feed bag on, too nice out there to not go back out,so I finished the front brakes & hooked up all the lines on the 74.

Nice work, its looking really great. Did you make the car stand out of 2 engine block stands, or did you buy it like that? If you bought it, do you have a website?
I'm used to going on my back with a can of rustoleum and a paint brush, to get the bottom of the car [smilie=r:
 

SiteLock

SiteLock
Back
Top