P.A.W. lifters

[moparman21]

Ok,
anyone here have experience with PAW lifters? We bought some for the 360 because "supposedly" theyre all the same..since theres only 2 lifter manufacturers PAW claims theres is as good as any comp cam or crane or the like..
we are thinking that they are not the same and built cheaper that is why we have this constant valvetrain chatter...no matter what (yes everyhting is good, lash and whatnot)

any help appreciated

 

[Not A Duster]

Two makers of lifters with how many grades of product?

 

[moparman21]

............. yes...........

 

[jodaddy1]

used a set years ago along with one of their superstock cams and had no problems??

 

[Da-ho]

Pleas tell us more about your setup. It might be mismatched somewhere and causing problems with the lifters even though its not their fault. First off what cam? [smilie=e:

 

[69.5CUDA]

are your pushrods the right length?....and this might sound realy stupid but...did you swap the rocker arms from side to side?....this will removes oiling and make noise

 

[moparman21]

ok better yet does anyone know why there is such a price difference from PAW's lifters and the name branders' (crane comp cams the like)
are the internals different?

thanx

 

[Plum Crazy]

I went with the Crane anti-pump ups because they have a stronger retaining ring for the plunger but Crane told me that too about limited manufacturers.
My comp cam regular lifters had 2 collapsed right out of the box so.... [smilie=e:

 

[moparman21]

we had a comp cams set have one collapse right from new engine startup