good progress today!!

[383duster]

better result then hot sex [smilie=a:

(oil filter is just a old one so the hole is closed and ofcourse that shitty looking distributor will be replaced with a nice and shiny MSD distributor [smilie=w:

[img]http://home.quicknet.nl/qn/prive/mb.boersen/blok01.jpg[/img]

 

[beeper*71]

Mmmmmmm, pretty!!!! Looks awesome! [smilie=e:

I've got a stack of those right side dump water pump housings...whatcha got for a radiator?

 

[b-body-bob]

You're gonna burn those plug wires

 

[383duster]

Mmmmmmm, pretty!!!! Looks awesome! [smilie=e:

I've got a stack of those right side dump water pump housings...whatcha got for a radiator?[/quote]

a nice aluminium one, thanks XL!! [smilie=b:

 

[383duster]

You're gonna burn those plug wires

i hope i don't burn them after i installed that nice wire looms from R&M specialties that i got [smilie=a:

[img]http://static.summitracing.com/global/images/prod/large/rnm-1101p.jpg[/img]

 

[XLR8R]

Looks great! Headers came early??? [smilie=e:

 

[383duster]

Looks great! Headers came early??? [smilie=e:[/quote]

this are the "wrong" headers, they (TTI) say the won't fit with the lakewood but with a little grinding on the bellhousing they fit nicely, now the other thing they say is that they only fit in the car with a 440 and not with a 383 (lowdeck)

I just will try it TOMORROW [smilie=e: if it fist, i rather keep this 2" headers then the 1 3/4 that are on theyre way to here

This is where they touch the bellhousing, i will make the bell following the line of the block and then it is good:

 

[b-body-bob]

That's the same place my Hedman headers hit on my Lakewood. Nothing a little angle-grinding can't fix. :beer:

 

[XLR8R]

Exactly the same place my TTis hit....ground it down, works fine.

 

[383duster]

now the only "problem"is this:

Fits B-engines (low deck) with INDY 440SR cylinder heads

I don't know how much difference in the port heights is between the SR and stock heads....will see tomorrow i gues [smilie=bunny.gif]

 

[viking]

Looks good!!! good luck tommorow! [smilie=e: [smilie=e:

 

[Rob R]

Looks Good

 

[383duster]

sooooooo mopey is level again, right side header is also mounted!

 

[viking]

Kewl!!! [smilie=e: [smilie=e: [smilie=e:

 

[XLR8R]

So...to play devils advocate here, what is gonna happen when it revs? Hmmmm?

 

[beeper*71]

Tight fit! Hope you plan on using a torque strap. [smilie=w:

 

[viking]

what is gonna happen when it revs? Hmmmm?

Oh boy... [smilie=e:

 

[68R/T]

So...to play devils advocate here, what is gonna happen when it revs? Hmmmm?

Tires go.......SCREEEEEEEEEECH [smilie=e:

 

[69x9x9]

is the T-bar going to fit back into the front socket? looks tight,,,nice job,lookin' good ! I'd invest in some spark plug booty's! [smilie=2:

 

[383man]

Thats looking real sweet !! [smilie=e: Ron