Giving New Life To An LL1 Dark Turquoise 1967 Plymouth VIP, A True Garage Find.....

SportFury70

Active member
I first and foremost before I even start this post/thread would like to thank a long time good friend of my stepdads for giving us the opportunity to buy this car. I also would like to thank my stepdads other friend who he has known since college, for helping get this car with his car trailer as we do not have one. My stepdad sold his other '67 VIP 4-door hardtop project to get this car. This car is the newest Fury added to my stepdads collection, more information below.....

The Car- The car is a 1967 Plymouth VIP in LL1 Dark Turquoise Poly with a "G" code 383 2bbl engine, a black vinyl top and black interior. It was built October 11th 1966 (A11 on fender tag) at the Belvidere IL plant. The car came with a front bumperette strip but not a rear, and rear speaker. This car (at least in my honest opinion) is believed to be a survivor car as it has the original dealer sticker, the paint could use a polishing, and the car has some side scrapes.

The History- The cars history is actually quite unique. The car was originally bought brand new by Mr. and Mrs. Mucciolo out of Miller Place NY on November 9th 1966, for $3,425.26 from Bellerose Plymouth in Bellerose NY. A 1960 Ford Thunderbird was traded in for the car. We have the original sales receipt and check, we also have original inspection receipts, and a few shop receipts which are in the pictures posted here. The car has exchanged hands three times since the original owners; once in 1991 a fellow named Mr. Donovan owned it, once in 2001 where a fellow named Mr. Fusco owned it, and then our good friend in 2004 until my stepdad got it last year in 2021. Our good friend bought the car and stored it in the garage since he bought it in 2004. The car is a 20 year garage find.

The Plan- The plan which may or may not change is to obviously get it running and back on the road, change the front bumper out for a good used one or NOS one, MAYBE add a right hand outside mirror at some point, paint the engine like in the "Pumpkin" our 1970 Fury III 4-door hardtop, try to find a replacement 2bbl carburetor but if we cannot find one put a 4bbl intake and high performance manifolds on with a dual snorkel air cleaner, clean the moldy interior, put tilt-a-scope or tilt-tele steering from our Sport Fury convertible in, drop the gas tank and se if it can get rebuilt but 95% likely get a replacement as it doesn't smell so good from old gas and is probably rotted inside, fix some rust in the back window, cut the trunk floor and replace it because there is some rot on the right side, rebuild the brakes and replace the original wheel covers with the turbine style wheel covers, add dual exhaust, and possibly try to put the car in the survivor tent display in Carlisle at some point.


My Personal Plan- My personal plan is to try and document everything that is done to the car and post it here when I can and have time to.


I hope you join us along for the ride in giving this unique VIP a new life and getting it back on the road again. Thank you for looking!



When first found below.....
1642807302467.png1642807442290.pnguniversity sticker.jpgvip underneath 1.jpg1642807538957.png1642807616157.png
vip trunk.jpg
vip left rear tre.jpgvip left side 1.jpgvip left side 2.jpgvip top.jpgvip stickers.jpgvip front.jpg1642808108795.png
 
It's official, it's rescue time! When we first tried getting the car out of the garage, we left the old flat tires on and used a winch to see if the car would budge. Nothin', so we swapped 3 of the old tires because we could not get to the 4th tire because the car was against the wall for back up spare tires my stepdad brought. We tried pulling with the winch hooked to my stepdads pickup and it came out of the garage. We also moved some parts out of the way too.....
1642808302920.png1642808884645.png1642809006884.pngcoming out of garage 2.jpg

It's official it's out after 20 years!
1642810418379.pngcoming out of garage 3.jpg1642809557573.png
 
Last edited:
Now that the car is out and nothing is on it now after 20 years, I can get some pictures of the engine and interior..... 1642809624286.png1642809762693.png1642809817076.pngcerticard.jpg1642809890500.png1642810343075.png
 
Last edited:
Now that the car is home, we can go through all the significant and rare paperwork our friend gave us with the car including the original selling dealer booklet below.....1642817647627.png1642817968767.pngvip book 2.jpg

The original order form.....
1642818501048.png1642818533518.png

The original sales check receipt....
check.jpg

Original NY state inspection cards from the 1990's.....
inspection.jpg

Even a Midas muffler receipt.....
midas.jpg
 
This is all I got on the car right now, it will hopefully be worked on sometime this year or next year. Long story short, it will be a few years to get it going again. More to come....
 
with it such a clean and neer perfect survivor..why mod it in any way shape or form, not sure why you even need a carb?!!?

im no purist by any means but a true survivor doesnt come along and is only true once, i wouldnt turn a single bolt on it that didnt need to outside of maintinance
 
with it such a clean and neer perfect survivor..why mod it in any way shape or form, not sure why you even need a carb?!!?

im no purist by any means but a true survivor doesnt come along and is only true once, i wouldnt turn a single bolt on it that didnt need to outside of maintinance

That is my exact logic too they are only original once, just get it running and do the bare minimum just maintain it BUT my stepdad thinks differently for some reason. For example he already thrown out the original hubcaps from this car because they had some road rash on them, BUT needless to say I saved them and am keeping them for when I hopefully get the car. It's sadly his car and you can't argue with him about it. I also asked his friend what he thought of painting the engine and adding dual exhaust can make it a non survivor because I think it can and he says it is a survivor as long as the paint or interior is not touched
 
shrug, its when you start swappin parts its no longer original either, replaceing parts is one thing..swappin and tossin is a whole nother thing..like said hubcaps you saved, good on you for saving em

the column is a hard no for me, the exhasut eh i can go either way, but if its the original pipes.....

with that kind of milage on the car doing anything but maintinance ruins the survivor...how many car you reckon still have the orignal hoses, exhaust pipes etc......i wonder if those were the original tires?
 
Hi everyone,

I got an update on the VIP. Yesterday after putting in a battery, hooking up a temporary fuel line with a gas can, and a half hour we got the car running. We also gave it a bath to see what it looks like all cleaned up; granted the car has some dull and pitted chrome BUT it will clean up nicely......

VIP1.jpg

VIP 2.jpg
 
Hi all,

I'm back with an update on the VIP. After the car was washed we put the car in the long term storage garage, and took the trunk mat out and this is what I saw. My stepdad already knew about it. We already have a new trunk floor from a parts green '67 Sport Fury hardtop thanks to another good friend.....

VIP trunk 1.jpg


VIP trunk 2.jpg


VIP trunk 3.jpg


VIP trunk 4.jpg


The parts floor below, which I will get more and better pictures of when we actually go to use it.....

VIP trunk 5.jpg
 
I got some pictures of the old original trunk mat before it was unfortunately thrown away as it was just too far gone to save even though I wanted to do that, and a new one was ordered from Herb's Mopar Parts.

mat 1.jpg

mat 2.jpg

mat 3.jpg
 
The gas tank has also been removed from under the car, the old gas just needs to be emptied out of it now. Depending on the condition of the inside, it will either be restored by our local radiator shop who also restores gas tanks if it is in good condition OR be replaced if it is not in good condition......

tank 1.jpg

tank 2.jpg
 
A final update on the car for now is that the trunk floor has been cleaned, wire brushed, scrapped and vacuumed to see where we need to exactly cut it out to replace it. An idea blueprint/template where we need to cut has also been made.....

vacummed.jpg


template.jpg

More to come soon!
 
Your VIP is in near pristine condition for being 55 years old. That trunk rot is almost non-existant.
 

SiteLock

SiteLock
Back
Top