Boredom + Sawzall + '74 Newport Parts Car =.......

[Diplomat_Wagon]

Hey PrimerDust look what I did!

Yup, you should have to have a license to own and operate a sawzall in my case.


After I pulled the front clip off of it I was looking for somthing to do with it since the front end and lower rear 1/4's was all I bought the car for.

So here's what I did.

Before.

The weapon of choice.

Next, take off back doors.

The passenger side door came off easy but the driver door would not open at all so I had to take it off the hard way.

Hey look! Cheap suicide doors! :laugh:

Then zip that big sucka in half!

Do some triming.

Now where did I put that pail of glue and the "Damn Is This Thing Ugly!" bumper sticker?

 

[XLR8R]

ROFL! Too much time on your hands, huh?

 

[69.5CUDA]

LOL isnt a sawzall fun!!! go look at my 70 PU pics

 

[Da-ho]

How many blades did you snap? Its amazing just how little is really there on a unibody isnt it? [smilie=2:

 

[giowest]

How many blades did you snap? Its amazing just how little is really there on a unibody isnt it? [smilie=2:[/quote]

Blades?, I'm thinking cans o beer.

 

[gomopar440]

Ya know [smilie=e: , maybe you should try that on a '06 Charger.

 

[Diplomat_Wagon]

How many blades did you snap? Its amazing just how little is really there on a unibody isnt it?

Blades?, I'm thinking cans o beer.

Well me and my two buddies went through a few. [smilie=a: [smilie=a:

We were pulling the front end off.

 

[beeper*71]

Well me and my two buddies went through a few. [smilie=a: [smilie=a: [/quote]


Perfect! [smilie=a:

 

[Da-ho]

Went through some vodka too it looks like [smilie=e:

 

[69x9x9]

Was this guy workin' and partyin' with ya' ??

 

[Da-ho]

Give that young lad a cold beer and a hot number-hes ready. [smilie=e:

 

[Diplomat_Wagon]

Yeah we went through a whole mickey of mother Russia's finest.

There was actually 24 beer that was downed between 4 guys and one girl.

Those are the only bolltes that made it into the car, the rest the doofuses crushed in the vise. [smilie=e:


They were actually helping me for about the first 12 beer and then I was the only one trying to get something done, got rather burry towards the end. [smilie=a:


Oh on a sad note my sawzall was K.I.A during this (Cheap piece of German crap!) this is the third and final time the saw has broken, the little plate that holds the blades in broke and it's a $45 little piece of steel.

So I'm going to retire it and get myself a MasterCraft saw with some freaking warrenty! [smilie=e:

Oh yeah I only broke 3 blades and ripped all the teeth off of another. [smilie=e:

 

[Anonymous]

Yeah we went through a whole mickey of mother Russia's finest. [smilie=e:[/quote]

In Soviet Russia...


The music plays you! And the drinks are the finest en zee hole vorld!

[smilie=a:

 

[Da-ho]

I have a Millwaukee. Its cut up alot of stuff over the yrs, you get what you pay for. [smilie=e:

 

[69.5CUDA]

DEFINATLY get a millwakie they hold up very very well cut up quite a few parts cars with mine and a few trucks...not to mention 2 roof swaps and some truck frame shortening

 

[gomopar440]

So what's happening with the truck project? I haven't seen any updates on the "members progress" section for quite a while. I had a 68 3/4 SWB PW a while back [smilie=s: .

Your chop job looks sweet so far. [smilie=e:

 

[XLR8R]

I like my Makita. Seems to hold up well. Crappy Tire did sell em.....

 

[beeper*71]

Milwaukee. Ours gets used everyday for the last 8 years, zero problems until replacing the blade guide just last week...for a whopping $7.65. [smilie=r:

Nuff said. [smilie=a:

 

[BootHead]

Dippy, that was cool! It's nice to "kill" one once in a while.

hmm air chisel, 3 horse compressor, 71 satellite.
leaves lotsa time for beer drinkage. Even took a break for a tetnes shot. Big stuff was handled with 7 1/2 inch cut off wheels in a skil saw.

>>>>>googles Cheesehead Tool. >>>>>>>thinks AOL was cool! >>>>>>>is an idiot or maybe just moparnutz.

 

[Diplomat_Wagon]

So what's happening with the truck project? I haven't seen any updates on the "members progress" section for quite a while. I had a 68 3/4 SWB PW a while back

Are you talking to me?


I have never had a truck project.