Michigan International Speedway pics + 4-speed stuff

[dustergal]

This is a great show they have every year at Michigan International Speedway, with over a thousand cars.

At the end of the day you can run your car on the track itself.

They had a small swap meet area and we found an A-body A833 four speed cast iron trans, aluminum bellhousing, shifter, and rods that came out of a '68 Dart, and an LD340 intake with a 600 Holley DP carb. Guy said $200 for everything. We've been wanting to convert the Dart to a 4-speed, and we needed an intake for the Challenger, so I think we did good. Now we have to accumulate everything else for the 4-speed swap, oooof.

The baseball shifter is a nice touch, no?

 

[Moparlady]

Now we have to accumulate everything else for the 4-speed swap, oooof.

Well, judging by just about every Mopar swap we've ever been too, you should have no problem getting A-body pedals, unless you already have them. We were in Carlisle last weekend, and there were sets of them everywhere. Lots of complete 4-spd setups, too. You got the money, it's out there [smilie=2:.

Looks like that show had a lot of fine Mopars there. I'll take that '67 Coronet R/T thank you..........:toot:

 

[69.5CUDA]

hell even i think ive got a spare set of the pedals....the tunnel hump can be got i belive thru laysons which will even have the template for where it goes....ohh wait your dart is what year?......i might have the correct "converter" humped tunnel for it

 

[dustergal]

We definitely need the pedals so if anyone has a set let me know what you want for them. Our Dart is a '76. The swap is going to be a winter project so we've got time to do searching for other parts.

 

[69.5CUDA]

ill have to see if i have the goofy hump thats for the duster converter area..i had one its a question of where...probably hiding with the pedals...wonder if the white fish still has its [eddals in it

 

[69.5CUDA]

DG i HAVE located the hump i have that IS a duster/dart "cat" era hump..AND i have a template i will gladly trace out so you know where the factory cuts were........when i replaced this hump in my 68 fish with a unit from a 69 valiant i took alot of floor with it and turned the remaining floor into a perfect template for doing a 4spd swap

i know i "did" have 3 sets of 4spd pedals around....ill dig around time permitting and see if i can find them..hell hey fishy if you see this...do you remember if the 4x project had 4spd pedals in it or not?

anyway its highly unlikely that i dont have a set of pedals i can part with along with the hump..shoot me a PM and you can toss me a price and its yours..ill let ya know when i find the pedals

 

[dustergal]

just sent a PM, thanks!