Dr.Jass
Pastor of Muppets
I have a set of the rare Super High Performance wheels from a Chrysler Conquest TSi for sale. The fronts are 16x8, the rears are 16x9. The fronts have a pair of 225/50R-16 Bridgestone Potenza G009 tires with low mileage on them, the tires are not weather-checked and have been stored indoors since new. I have a set of rear tires that are brand-new General Grabber UHP in a 255/55R-16 size; they are not mounted on the wheels yet. Someone started to polish the rears but did not finish the job; The bead area has some minor damage but I'm assured they will balance out just fine. Wheelsamerica.com can restore them to like new for $129 each, shipped, or you could just finish polishing the rears and do the fronts to match. I have all four center caps, which is sayin' something.
These will bolt to the classic 5 on 4½" Mopar/Ford/AMC bolt pattern, however the center register is slightly smaller so they won't seat fully. My course of action was going to be machining the register on the rotors on a brake lathe (easy, if you know what you're doing) and have a friend machine the axle shafts' registers on his lathe. You could also have the wheels machined to the larger register, or run a spacer about ¼" thick.
These are hard wheels to find. I paid $300 for the rear wheels alone, and I have another $250 tied up in the new tires. Asking $400 for everything, plus shipping. I will consider offers.
PM me through the board, or e-mail me at rallye1972 "@" hotmail.com (no spaces or quotes).
These will bolt to the classic 5 on 4½" Mopar/Ford/AMC bolt pattern, however the center register is slightly smaller so they won't seat fully. My course of action was going to be machining the register on the rotors on a brake lathe (easy, if you know what you're doing) and have a friend machine the axle shafts' registers on his lathe. You could also have the wheels machined to the larger register, or run a spacer about ¼" thick.
These are hard wheels to find. I paid $300 for the rear wheels alone, and I have another $250 tied up in the new tires. Asking $400 for everything, plus shipping. I will consider offers.
PM me through the board, or e-mail me at rallye1972 "@" hotmail.com (no spaces or quotes).