451 Disassembly begins........... PICS

[snook]

Started tearing down a perfectly good 451 yesterday . Everything looks great so far as it should after 15-20 runs and a few dyno pulls. Combustion was great, fairly even burn across the top of the pop-ups and head CC. Anyway here's the pics:

 

[snook]

More Pics;

 

[69.5CUDA]

god i wouldnt have the heart to pull it apart

 

[71ChargerRT]

No kiddin 69, that's definately a nice piece of equipment

 

[BootHead]

god i wouldnt have the heart to pull it apart

yeah go blow it up in the 'stang. [smilie=f:

that is a tricky little cam drive, a few bucks right there.

 

[beeper*71]

Mmmmmmmm, roller cam. Spoken for?

 

[snook]

Beeper, the only thing I'm keeping is the Jesel belt drive and the balancer. Everything else is up for grabs. The roller cam could go as just the cam or a cam/lifters set. I'm going fishing right now, I'll post a scan of the cam card when I get back.

 

[beeper*71]

Cool, cam and lifters is what I'd be interested in. Looking forward to seeing those specs.

 

[Rob R]

Be easier to sell in bits...Did you leak it before you took it apart?

 

[snook]

Nope, no leakdown test.

 

[snook]

It's a Scott Brown roller, the lifters are Isky 1612RH, pic of cam card:

 

[383duster]

What is done with the heads and what CC are they? I now got box-stock 84cc eddy's and wanna step up

and i was gonna ask for the Jesel and cam/lifters but i see i do not have to ask

 

[snook]

Cam and lifters are still available as are the heads. The heads are now 72-74CC, I need to verify. The port job was done by Dan Dvorak and is the Super Port Flow deal: http://www.dvorakmachine.com/heads.shtml .

 

[383duster]

Cam and lifters are still available as are the heads. The heads are now 72-74CC, I need to verify. The port job was done by Dan Dvorak and is the Super Port Flow deal: http://www.dvorakmachine.com/heads.shtml .

with that 72-74cc im going from 10.5cr to 11.6cr, that is too much for me cause i wanna run pump gas, race gas is rare here in holland and very expensive.

would that cam work with 10.5cr and what price are you thinking about?

 

[snook]

I'm sure it would work for you but if it's the best choice for you, I don't know. You have a PM.