Search results

1 to change the light bulb and to post that the light bulb has been changed 14 to share similar experiences of changing light bulbs and how the light bulb could have been changed differently 7 to caution about the dangers of changing light bulbs 1 to move it to the Lighting section 2 to argue...

I just had to share this with you all. It takes a bit but is worth the read ROFLMAO!!! "Anger Management When you occasionally have a really bad day, and you just need to take it out on someone, don't take it out on someone you know, take it out on someone you don't know, but you know...

Just wondering if anybody knew a place that could change a spedometer from mph to kph (kilometer) Instead of having a paper chart on the dash telling me how fast i am going when going 50 mph.:hmmm: Just thought about that today while at work and changing a metric print into an imperial print...

I currently do not have a radiator for my 67 dart with 340. Been poking around trying to find sizes and playing with summit racing. Thinking aluminum rad but i do not seem to be able to find anything. I see 22" inch rad is what i am looking for. What is the general consensus of what will fit...

Ok i have a clearance issue on my 67 dart project. I have the 6 pack and cleaners installed on the engine and the hood does not fit on the car. The cleaners hit the hood. So i have been debating for awhile on which direction to go. I can either pick the dart 6 pack hood scoop Or how about...

just linking my kijiji ad for a backhoe. http://chatham-kent.kijiji.ca/c-ViewAd?AdId=294449723&MessageId=MSG.VIEW_AD.EDIT_AD_SUCCESSFULMXAdIdMZ294449723MXGuidMZ130dead5-0e40-a20b-2713-5178fffe816e&mpname=Activity-EditAd&mpuid=1700239%3B341%3B294449723%3B15383409%3B%3B

We were dressed and ready to go out for the New Year's Eve Party. We turned on a night light, turned the answering machine on, covered our pet parakeet and put the cat in the backyard. We phoned the local cab company and requested a taxi. The taxi arrived and we opened the front door to...

I ordered a pitman arm for my power steering box on the 67 dart. Box came out of a 69 dart. Not sure how i did this but i ordered a moog 7076 . Parts dealer said it would be correct. Come to find out the idiot was wrong.[smilie=2: Now to change parts dealers :hmmm: The arm i have is way...

these are the two tires i am thinking about for my 03 dakota. Mainly highway daily use. Which one would you choose if you had to choose. I lean to the mud, but the noise is my only issue. I like the mud, but i know what the bfg all terrain sound like. I realize the wear characteristics of the...

Looking for some used tires for mock up and to be sure they can fit in the wheel well before i purchase a brand spanking new set. 295-50-15 325-50-15

I attended Detroit Autorama and i have a bunch of these show special coupons save 10% discount code number ZH70914051 hope it can help someone

[smilie=2: [url]http://www.jalopyjournal.com/forum/showthread.php?t=348830[/url] found that while doing research.:giggedy:

Just found out about this last night. http://www.usparcelpickup.com/ Only downside is its the Port Huron/Sarnia border and the fear of bumping into Xl :D

The rear brake hoses from a 2000 Ford mustang will they simply bolt up to my 67 darts lines? Did the mustang go metric by this time frame? I dont have an existing line from the mustang and i am unsure what the dart has for brake lines.

So as i have mentioned a few times in my progress posts with my '67 dart that i was working on a rear disk brake setup using the mustang caliper and rotor. First my blank sheet of ideas My working drawing :) I managed to find a salvaged set of 2000 Ford Mustang rear calipers and rotors...

You can view the page at http://www.moparnuts.com/content.php?14-1967-dart

As a bagpiper, I play many gigs. Recently I was asked by a funeral director to play at a grave side service for a homeless man. He had no family or friends, so the service was to be at a pauper'scemetery in the Kentucky back-country. As I was not familiar with the backwoods, I got lost; and...

I have been tinkering a lot with this website for awhile now. Their mission statement “Our Mission is to ensure and promote our children’s right to maintain significant and meaningful relationships with both parents after relationship breakdown”. www.notalldadsaredeadbeats.com Thought i...

I read somewhere in my travels that moog now has its parts outsourced and spicer is the better of suspension parts. or should i go with the pst stuff? polygraphite? I was planning on using the moog problem solvers...

So i picked up an a body anti sway bar at a swap meet awhile back. It measures 44 inches from one hole to the other. I was planning on using it on the 67 dart, but it seems to be too wide. What is the measurement suppose to be? do i have a later A body sway bar? Anybody have any good...